Aluminum gussets come in many sizes, including panel width, thickness, and height of hem. The selection should be based on the characteristics of the bathroom at home. The aluminum gusset is divided into two types: punched and flat. The surface punching can be ventilated and sound-absorbing, and the inside of the gusset is covered with a film cushion. The moisture can be absorbed by the film through the punching hole, so it is most suitable for kitchens with more moisture. 600mm × 600mm microporous square plates, C150, C100 strips and 300×300, 300×600 aluminum gussets are the most widely used on the market.

The quality of aluminum gussets is not thin or thin. The key lies in the texture of aluminum. The general aluminum gussets for engineering use are 0.8 mm or even thicker. Why? Because some engineering gussets are long, in order to prevent deformation. Therefore, it should be thicker and harder. On the contrary, the aluminum plate for home decoration is rarely more than 4 meters, and there is no heavy object on the ceiling of the aluminum buckle. Therefore, the aluminum plate of the home decoration can be said to be 0.6. The millimeter is enough. So, why do you go to the building materials city, many salesmen tell you about their 0.8mm, and friends say that someone introduced him to 0.88mm; it is often because their boards can't, so they can only use thickness to be ridiculous— - It is really devastating.

Explicitly tell everyone that 0.6 mm is enough. Take the aluminum plate of an imported brand with a high reputation on the market as an example. Its price is more than 300 yuan per square meter, but what is its thickness? 0.5mm, not as good as 0.6mm! Why, the board is not good or bad. It lies in the thickness but in the substrate. In fact, if the aluminum gussets you consult are brand names, in the mid-range, most of them are 0.6 mm.

As for why some brands are 0.8 mm, they are not good. Some brands use aluminum for cans. Because of the quality problems of aluminum itself, they want to make the aluminum plate very thin, because it is impossible. The aluminum is not good, the board has no way to pull it evenly, so they can only do it in thick.

Therefore, in order to identify the aluminum gusset, in addition to paying attention to the surface finish, it is necessary to observe whether the thickness of the board is uniform, and feel the elasticity and toughness by pinching the board with your hand. [PAGE]

Note on the purchase of aluminum ceiling:

The main thing to choose an aluminum ceiling is to look at its material and not to focus on its thickness. According to the design principle, the thickness of ordinary home decoration strips can reach 0.5mm, 0.6mm, and very few to 0.8mm. Why? Because of the use of aluminum alloy materials, like the best Lexilong in foreign countries, domestic The best Jin Penglong and other brands, not necessarily thick enough is enough, and then the span of the home decoration strips will not be very large, there is no need to use so thick.

If the economic conditions allow the film to be considered, it will be easy to scrub in the kitchen, bathroom, etc., and it will not change color after a long time. Jin Penglong can be customized for customers, and at the same time provide multiple solutions for customers to achieve the best decorative effect.